3
WARNING
Improper installation, adjustment, alteration, ser vice or
maintenance can cause property damage, personal injury
or loss of life.
Installation and service must be performed by a li censed
professional HVAC installer (or equivalent) or a service
agency.
IMPORTANT
The ERV/HRV may be used with an S30 and E30 control
system. The iComfort S30 will require a smart hub 2.0.
Do not connect the S30 or E30 to the ERV/HRV before
confirming the thermostats have 0.03.5.0XXX or higher
software.
Shipping and Packing List
Package 1 of 1 contains
:
1 - Assembled ventilator
1 - Bag assembly contains the following:
Table 1. Bag Assembly Contents
Quantity
Included
Description
2
Drain spout assemblies with one drain tee (included with all
models except ERV5-130)
2
Drain plugs (included only with ERV5-150-TPD and ERV5-
175-TPD)
4
Mounting brackets (included only with ERV5-130)
4
Hanging straps (included with all models except ERV5-130)
1
Installation instruction and warranty
General Information
This instruction is intended as a general guide and does not
supersede local codes in any way. Consult authorities who
have jurisdiction before installation.
IMPORTANT
All controls referenced in this instruction are field-
provided. Lennox catalog numbers are provide for all
reference controls.
Model and Catalog Number
Cross-References
Table 2. Models and Catalog Numbers
Model
Catalog #
Description
HRV3-150-TPD
17Y64
Heat Recovery Ventilation
HRV3-195-TPD
Y2143
Heat Recovery Ventilation
HRV5-150
17Y58
Heat Recovery Ventilation
HRV5-200-TPD
17Y62
Heat Recovery Ventilation
HRV6-HEX095-TPD
17Y52
Heat Recovery Ventilation
HRV5-270-TPD-ECM
17Y53
Heat Recovery Ventilation
ERV5-130
17Y54
Energy Recovery
ERV5-150-TPD
17Y55
Energy Recovery
ERV5-175-TPD
17Y57
Energy Recovery
All of the above reference ERV/HRV models are compatible with iComfort S30,
Smart Hub 2.0 and E30 with firmware 3.50.xxx. Use only the catalog numbers
reference above for ordering when using either a iComfort E30 or S30 to
control the accessory.
NOTE:
If the unit is certified ENERGY STAR
®
, the following applies:
•
This product earned the ENERGY STAR
®
by meeting
strict energy efficiency guidelines set by Natural Re
-
sources Canada and the US EPA. This product meets
ENERGY STAR
®
requirements only when used in Can-
ada.
•
To ensure quiet operation of the ENERGY STAR
®
certi-
fied H/ERV, each product model must be installed using
sound attenuation techniques appropriate for the instal-
lation.
• The way your heat/energy-recovery ventilator is in-
stalled can make a significant difference to the electri
-
cal energy you use. To minimize the electricity use of
the heat/energy-recovery ventilator, a stand-alone ful-
ly ducted installation is recommended. If you choose
a simplified installation that operates your furnace air
handler for room-to-room ventilation, an electrically ef-
ficient furnace that has an electronically commutated
(EC) variable speed blower motor will minimize your
electrical energy consumption and operating cost.
• Installation of a user-accessible control with your prod-
uct model will improve comfort and may significantly re
-
duce the product model’s energy use.
Содержание ERV5-130
Страница 36: ...36 Figure 43 Wiring Diagram HRV5 270 TPD ECM...
Страница 60: ...60...