13
iComfort E30 (15S63) or S30 (12U67)
Ventilation Control Installation and Setup
Guide
Figure 7. iComfort S30 with Smart Hub 2.0
Figure 8. iComfort E30
All of the models reference in “Table 2. Models and Catalog
Numbers” on page 3 are compatible with iComfort S30
using the Smart Hub 2.0 or E30.
IMPORTANT
The ERV/HRV may be used with an S30 and E30 control
system. The S30 will require a 2.0 smart hub,
Do not connect the S30 or E30 to the ERV/HRV before
confirming the thermostats have 03.50.XXX or higher
software.
FEATURES
The E30 or S30 can operate the ERV or HRV in the follow-
ing modes:
• ASHRAE 62.2 compliant mode.
•
Non-ASHRAE compliant mode - Environmental over
-
rides uses outdoor temperature and outdoor dew point
within a set parameter range.
• Timed mode - Runs ventilation equipment for a timed
amount per hour.
•
User demanded ventilation.
•
Provides ventilation for zoned and non-zoned applica
-
tions.
INSTALLATION OVERVIEW
• Refer to “ERV and HRV Wiring diagrams” on page 14
for wiring connections.
• For installer information concerning ventilation rates
and ventilation rates, thermostat ventilation control pa-
rameters, see the following sections.
•
For end user information go to “iComfort E30 (15S63)
or S30 (12U67) Ventilation Control User Guide” on page
19.
• Additional help and on-line tutorials are also available
on the iComfort support page at:
http://www.support.lennoxicomfort.com/help/index.html
Содержание ERV5-130
Страница 36: ...36 Figure 43 Wiring Diagram HRV5 270 TPD ECM...
Страница 60: ...60...