8
STEP 6
Bolt the HANDLEBAR SHAFTS (69) to the MAIN FRAME (1) on both sides and securely tighten.
STEP 7
Slide the WASHER (ø16.2xø22x1.5mm)(60) onto the HANDLEBAR SHAFT (69). Slide the RIGHT
HANDLEBAR (7) onto the HANDLEBAR SHAFT (69) in approximately the center of the sliding
range.
Place the PLASTIC WASHER (ø10xø18x2mm)(58) on the SHAFT on the lower end of the RIGHT
HANDLEBAR (7). Connect the right LINKAGE (8) to the RIGHT HANDLEBAR (7), then slide the
RIGHT HANDLEBAR (7) completely onto the HANDLEBAR SHAFT (69). Secure the right
LINKAGE (8) with the PLASTIC WASHER (ø10xø18x2mm)(58), WASHER (M8)(96), and NYLOCK
NUT (M8x1.25)(92).
Repeat on other side.