Healthrider H79t Treadmill Скачать руководство пользователя

Страница: 21 / 32

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline

to the lowest position before you fold the treadmill.

Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20

kg) to raise, lower, or move the treadmill.

1. Hold the metal frame firmly in the location shown

by the arrow below.

CAUTION: Do not hold the

frame by the plastic foot rails. Bend your legs

and keep your back straight.

2. Raise the frame until the latch knob locks in the

storage position.

CAUTION: Make sure that the

latch knob locks.

To protect the floor or carpet, place a mat under the

treadmill. Keep the treadmill out of direct sunlight.

Do not leave the treadmill in the storage position in

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the

left.

CAUTION: Make sure that the latch knob is

locked in the storage position. Moving the tread-

mill may require two people.

1. Hold the frame and one of the handrails, and place

one foot against a wheel.

2. Pull back on the handrail until the treadmill will roll

on the wheels, and carefully move it to the desired

location.

CAUTION: Do not move the treadmill

without tipping it back, do not pull on the frame,

and do not move the treadmill over an uneven

surface.

3. Place one foot against a wheel, and carefully lower

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

See drawing 2.

Hold the upper end of the treadmill

frame with your right hand. Then, pull the latch

knob to the left.

CAUTION: Do not turn the latch

knob.

If necessary, push the frame forward

slightly. Pivot the frame downward a few inches,

and release the latch knob.

See drawing 1 at the left.

Hold the metal frame

firmly with both hands, and lower it to the floor.

CAUTION: Do not hold the frame by the plastic

foot rails, and do not drop the frame. Bend your

legs and keep your back straight.

HOW TO FOLD AND MOVE THE TREADMILL

Handrail

Frame

Wheel

Frame

Latch

Knob

Frame

Содержание H79t Treadmill

































Результаты поиска

Содержание H79t Treadmill

Отзывы:

Похожие инструкции для H79t Treadmill

Бренды по названию

Популярные бренды

Healthrider H79t Treadmill, Руководство пользователя

Результаты поиска

Содержание H79t Treadmill

Отзывы:

Похожие инструкции для H79t Treadmill

Бренды по названию

Популярные бренды