Healthrider H79t Treadmill страница 15 Скачать руководство пользователя

Страница: 15 / 32

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

do this, you may damage the console displays or

other electrical components.

Plug in the power cord (see

page 13). Next, locate the

power switch on the tread-

mill frame near the power

cord. Press the power

switch into the reset

position.

IMPORTANT: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as

you plug in the power cord and press the power

switch into the reset position, the demo mode is

turned on. To turn off the demo mode, hold down

the Stop button for a few seconds. If the displays

remain lit, see THE INFORMATION MODE on page

19 to turn off the demo mode.

Next, stand on the

foot rails of the tread-

mill. Find the clip at-

tached to the key

and slide the clip

onto the waistband of

your clothes. Then,

insert the key into the

console. After a moment, the displays will light.

IMPORTANT: In an emergency, the key can be

pulled from the console, causing the walking belt

to slow to a stop. Test the clip by carefully taking a

few steps backward; if the key is not pulled from

the console, adjust the position of the clip.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2. Select the manual mode.

Press the Manual button on the console. If you are

not connected to iFit Live, the manual mode will be

selected automatically.

3. Start the walking belt.

To start the walking belt, press the Start button, the

Speed increase button, or one of the numbered

Quick Speed buttons.

If you press the Start button or the Speed increase

button, the walking belt will begin to move at 1

mph. As you exercise, change the speed of the

walking belt as desired by pressing the Speed in-

crease and decrease buttons. Each time you press

one of the buttons, the speed setting will change by

0.1 mph; if you hold down the button, the speed

setting will change in increments of 0.5 mph. Note:

After you press the button, it may take a moment

for the walking belt to reach the selected speed

setting.

If you press one of the numbered Quick Speed but-

tons, the walking belt will gradually change speed

until it reaches the selected speed setting. To se-

lect a speed setting that includes a decimal—such

as 3.5 mph—press two numbered buttons in suc-

cession. For example, to select a speed setting of

3.5 mph, press the 3 button and then immediately

press the 5 button.

To stop the walking belt, press the Stop button.

The time will begin to flash in the display. To restart

the walking belt, press the Start button or the

Speed increase button.

4. Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the

Incline increase or decrease button or one of the

numbered Quick Incline buttons. Each time you

press one of the buttons, the treadmill will gradually

adjust to the selected incline setting.

Reset

Key

Clip

Содержание H79t Treadmill

































Результаты поиска

Содержание H79t Treadmill

Отзывы:

Похожие инструкции для H79t Treadmill

Бренды по названию

Популярные бренды

Healthrider H79t Treadmill, Руководство пользователя

Результаты поиска

Содержание H79t Treadmill

Отзывы:

Похожие инструкции для H79t Treadmill

Бренды по названию

Популярные бренды