16.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 23 and 24).
15. Attach the Left and Right Rear Feet (41, 61) to
the Frame (57) as shown with four #8 x 1/2"
Screws (1).
Lower the Frame (57) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).
15
57
14. Raise the Frame (57) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (58) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (58) to
the Base (91) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).
Attach the upper end of the Storage Latch (58)
to the bracket on the Frame (57) with a 3/8" x 1
3/4" Patch Bolt (6) and a 3/8" Nut (12). Note: It
may be necessary to move the Frame (57) back
and forth to align the Storage Latch with the
Base.
58
12
57
6
12
3
91
Large
Barrel
Latch
Knob
12
14
1
41
61
1
