11
15. See step 11 on page 9 and remove the Console
(75) from the Console Bracket (78).
Remove the three screws from the back cover
(A) of the Console (75), and then remove the
back cover.
Connect the wire on the receiver (B) to the wire
in the Console (75).
Hold the receiver so that
the antenna is oriented as shown and is fac-
ing upward.
Remove the paper from the adhesive pad on the
back of the receiver (B). Press the receiver onto
the console in the indicated location. Then, reat-
tach the back cover (A).
Reattach the Console (75) to the Console
Bracket (78).
Note: Discard any other wires that are included
with the heart rate monitor.
If you purchase the optional heart rate monitor (see page 18), follow the step below to install the receiver
included with the heart rate monitor.
Wires
75
Antenna
B
A
Attach
receiver
here
16
