background image

19

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 18.

A. Plug one end of a long 3.5mm to RCA stereo audio

cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the AUDIO OUT jack on your VCR. 

B. Plug one end of a long 3.5mm to RCA stereo audio

cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-adaptor (available at electronics
stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR and
plug the wire into the unused side of the Y-adaptor.
Plug the Y-adaptor into the AUDIO OUT jack on
your VCR.

To use an iFIT.com MP3, CD, or video program, the
treadmill must be connected to your MP3 player, CD
player, or VCR. See HOW TO CONNECT THE
TREADMILL TO USE IFIT.COM PROGRAMS on
pages 17 to 19. 

To download iFIT.com MP3 pro-

grams, go to www.iFIT.com. To purchase iFIT.com
CDs or videocassettes, call the telephone number
on the front cover of this manual. 

Follow the steps below to use an iFIT.com MP3, CD,
or video program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page
12. 

Select the iFIT.com mode.

To select the iFIT.com
mode, press the iFIT
button; the indicator
above the button will
light. 

Press the Play button on your MP3 player, CD
player, or VCR.

Note: If you are using an iFIT.com CD, insert the
CD into your CD player; if you are using an
iFIT.com videocassette, insert the videocassette
into your VCR.

A moment after the Play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s 
instructions. Note: If the time is flashing in the dis-
play, press the Start button or the Speed increase
button on the console. The treadmill will not re-
spond to an MP3, CD, or video program while the
time is flashing in the display. 

During the program, an electronic “chirping” sound
will alert you when the speed and/or incline of the
treadmill is about to change. 

CAUTION: Always

listen for the “chirp” and be prepared for
speed and/or incline changes. In some in-
stances, the speed and/or incline may change
before your personal trainer describes the
change.  

3

2

1

HOW TO USE AN IFIT.COM MP3, CD, OR VIDEO
PROGRAM

B

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

34

A

AUDIO OUT

RIGHT

LEFT

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

34

Audio Cable

A

B

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

3

4

A

AUDIO OUT

RIGHT

LEFT

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

34

B

Wire removed from

AUDIO OUT jack

RCA 

Y-adaptor

Audio Cable

Содержание H 300































Отзывы: