Healthmark FIS-005, Руководство пользователя и руководство по установке программного обеспечения

Страница: 16 / 43

Page 15 of 24
4/24/2018
Performing Inspection
Following the steps listed below will ensure the proper use and best performance of
the Flexible Inspection Scope. Follow these steps prior to inspection.
1.
Secure the Flexible Inspection Scope into an arm fixture (optional).
2. Grasp the Flexible Inspection Scope near its distal end and gently insert the
Flexible Working Length into the intended device as shown in FIGURE X.
3. Adjust light on the Flexible Inspection Scope with the plus (+) or minus (-)
brightness button for ideal lighting.
4.
Use short advancements while keeping your fingers close to the device’s
opening. View the monitor while inserting into the device. If an obstruction
hinders the path of the Flexible Inspection Scope, gently attempt to manipulate
or rotate the device to avoid the obstacle (FIGURE X).
FIGURE X : Inserting the scope tip into device. FIGURE X
WARNING: The minimum bend radius of the Flexible Inspection Scope
is 0.85” (21.6 mm). Do not bend the Flexible Inspection Scope into a
sharper bend or damage to the device could occur.
WARNING: Do not apply excessive force to the Flexible Inspection
Scope. If you feel resistance, or an obstruction hinders the path of the
Flexible Inspection Scope, gently attempt to manipulate or rotate the
device to avoid the obstacle. You may also slowly withdraw a short
distance and try advancing again. Applying excessive force to the Flexible
Inspection Scope past an obstacle could result in damage to the device.