7
6. Attach the Seat (12) to the Seat Carriage (11) with
four M6 x 16mm Hex Screws (29) and four M8 Flat
Washers (18).
5. Connect the Upper Wire Harness (16) to the wire
harness on the Console (9). Insert both wire har-
nesses into the Upright (6).
Attach the Console (9) to the Upright (6) with two
M10 x 25mm Button Screws (55), an M10 x 30mm
Button Screw (39), and three M10 Split Washers
(69) as shown.
Snap the bookrack onto the Console (9) in the indi-
cated location.
7. Attach a Seat Handle (14) to the Seat Carriage (11)
with two M8 x 19mm Button Bolts (43) and two M8
Nylon Locknuts (56).
Attach the other Seat Handle (14) to the Seat
Carriage (11) in the same way.
8. Attach the Backrest (13) to the Seat Carriage (11)
with four M6 x 38mm Hex Screws (78) and four M6
Washers (25).
14
14
43
56
11
13
25
11
25
78
78
6
5
7
8
12
6
9
16
39
Wire
Harness
Bookrack
69
69
55
55
11
29
18
18
Make sure the
Wire Harnesses
do not get
pinched and
damaged during
this step.