head rush technologies QuickFlight QF150-12A, Руководство оператора

Страница: 43 / 54

3. Mounting Hardware - Check that all hardware used to connect the
QuickFlight mounting points to the structure anchor points is in opera-
tional condition, secure, and free of corrosion.
4. Webbing Extension and Retraction - Check that the webbing extension
and retraction is smooth and maintains resistance throughout its range.
5. Upper Webbings - Simultaneously, fully extend both Upper Webbing lines
from the QuickFlight device. Check the condition of the lines, looking for
damage or discoloration. Refer to Section: Upper Webbing Inspection
for replacement criteria. If worn or damaged, replace with a new Upper
Webbing assembly.
6. RipCord Webbing - Check the condition of the RipCord Webbing includ-
ing the Overload Protection Assembly, looking for damage or discolor-
ation. Refer to Section: RipCord Webbing Inspection for procedures and
replacement criteria. If worn or damaged, replace with a new RipCord
Webbing assembly.
7. RipCord Connection Hardware - Check that the Webbing Connection
Rings used to connect the QuickFlight RipCord Webbing to the Quick-
Flight Upper Webbings are both fully closed and tightened according to
the manufacturer’s instructions. Inspect the rings for damage and replace
if necessary. Head Rush Technologies allows the use of the Petzl Ring
Open only to connect the RipCord Webbing to the Upper Webbings.
8. Participant Connection Hardware - Inspect the condition of the carabin-
ers or other applicable Participant Connection Hardware, checking for ex-
cessive wear, damage, and correct operation of the locking mechanisms.
If a carabiner gate does not automatically lock, lubricate the carabiner
with dry graphite or dry PTFE based lubricant only until fully operational.
Do not allow lubricant to come in contact with any webbing line. If full
functionality of the locking mechanism cannot be restored, replace the
carabiner.
IF A CARABINER IS DAMAGED OR UNSERVICEABLE, ONLY AN EN 362 CERTIFIED
TRIPLE LOCKING CARABINER WITH LANYARD KEEPER MAY BE USED AS A RE-
PLACEMENT CARABINER. HEAD RUSH TECHNOLOGIES RECOMMENDS THE USE
OF THE PETZL AM’D CARABINER WITH CAPTIV LANYARD KEEPER.
9.
Lanyard Keepers -
Inspect the Lanyard Keepers, checking that they are
not cracked or damaged, and that they maintain proper positioning of
each Carabiner on the ends of the RipCord Webbing. Replace damaged or
non-functional Lanyard Keepers.
43
headrushtech.com | +1-720-565-6885