head rush technologies QuickFlight QF150-12A Скачать руководство пользователя | Manualshive

Страница: 21 / 54

background image

8.0 INSTALLATION

8.1 Precautions

ALWAYS USE DESIGNATED MOUNTING POINTS

Never install the Free Fall Device using any part of the device apart from the
designated mounting points. Incorrect mounting can result in serious injury or
death.

ALWAYS USE THE CORRECT MOUNTING HEIGHT

Failure to install the device at the correct mounting height could result in
damage to the device or loss in device performance.

HARD IMPACTS MAY RESULT IN STRUCTURAL DAMAGE

Dropping of, or hard impacts to, the Free Fall Device can result in serious
damage to mounting points and internal parts and may compromise safety
of operation. If the Free Fall Device is subject to a hard impact, remove it
from duty and return to a service agent for inspection.

HEAVY ITEM - 25 KG (55 LBS)

Take care when lifting the Free Fall Device. Take care not to drop the de-
vice as this may result in serious injury or equipment damage.

ALWAYS MOUNT VERTICALLY

Always mount the Free Fall Device vertically with the nozzle pointing
downwards and the line exiting the bottom of the device. Failure to do so
will result in incorrect operation and compromise User safety.

HARMFUL CONTACT

Do not allow solvents, acids, sharp edges etc. to get into contact with the
device, especially the webbing. If in contact, the Free Fall Device must be
inspected.

8.2 Standards

Prior to installation, all Operators must be familiar with the requirements of all
relevant Standards for anchor points, hardware and equipment used with the
Free Fall Device.

8.2.1

ANCHOR POINTS

At least two anchor points must be used to mount the QuickFlight Free Fall
Device. Do not attach Primary and Secondary Mounting Points to the same
anchor point. All anchor points and connectors used with a QuickFlight Free
Fall Device must conform to any federal or state requirements for such devic-
es.

21

headrushtech.com | +1-720-565-6885

«
...
19
20
21
22
23
...
»

Содержание QuickFlight QF150-12A























































Отзывы:

Нет отзывов

Похожие инструкции для QuickFlight QF150-12A

Бренд: Garland Страницы: 36

Бренд: 4MOMS Страницы: 20

Бренд: Yealink Страницы: 2

Бренд: Yealink Страницы: 6

Merrytec MK054V RC Series

Бренд: V-TAC Страницы: 105

KTS-WB61141142 Series

Бренд: SICK Страницы: 8

Бренд: SimplyHome Страницы: 2

Бренд: Metra Electronics Страницы: 2

Бренд: Adam Страницы: 22

Бренд: BS Bodensteckdosen Systemtechnik Страницы: 14

Бренд: hepco & becker Страницы: 6

Бренд: Bisque Страницы: 14

Бренд: MD SPORTS Страницы: 28

Бренд: Moog Videolarm Страницы: 7

Бренд: Whispbar Страницы: 15

Бренд: ZERA Страницы: 12

Бренд: MAXBOTIX Страницы: 8

Fast Track C600

Бренд: M-Audio Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды