Page 9 of 16
User Manual
receivers fully powered and the matrix set to IR call-back enabled and IR TX
Swicth mode activated, two -way IR will now be possible.
Note: Misplaced or poorly secured IR Emitters and Receivers may result in
intermittent IR control signals passed to and from the matrix. Check your
placement and adjust if necessary.
ADVANCED OPERATION
Typically, unless alternative methods of controlling the matrix are chosen or
problems with device communication through the matrix encountered, basic
operation is all that is required to operate your matrix. However, the following
information on advanced operation will detail how the matrix system can be
configured and for advanced control and settings can be altered or data
manually input should such problems arise, as well as configuring the system for
third party control.
8. SINGEL UTP Receiver
1
2
3
4
5
6
6
7
67
8
678
9
