User Manual
Page 10 of 16
1. HDMI OUT:
This slot is where you connect the HDTV or monitor with HDMI
cable for input source display.
2. LOCK LED:
This blue LED illuminate when the signal locked.
3. POWER LED:
This blue LED illuminate when the device is connected with
power supply.
4. Coaxial OUT:
This slot is where you connect to the amplifier with coaxial
cable.
5. ARC SW:
Switch this SW to open or close the ARC function.
6. DC 5V:
Plug the 5V DC power supply into the unit and connect the adaptor
to AC wall outlet.
7. IR RX:
This 3.5mm phone for super IR control system IR receiver .
8. IR TX:
This 3.5mm phone for super IR control system IR Emitter.
9. CAT5E/6:
This CAT5E/6 port connect to HDMI Matrix CAT OUTPUT with
CAT5e/6/7 cable.
AUDIO RETURN CHANNEL (ARC)
The connected display must support this function for ARC to function correctly.
When ARC is activated, the Coaxial output of the receiver unit will output the
display’s content audio signal. When ARC is de-activated, the Coaxial output of
the receiver unit will output the source’s audio signal.
IR
IR BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit; place
blaster in front of the IR eye of the source.
To control the display: Plug IR Blaster into IR TX port of receiver unit; place
blaster in front of the IR eye of the display.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR RX port of receiver unit; place
receiver at or near display.
To control the display: Plug IR Receiver into IR RX port of transmitter unit; place
receiver in position where it is able to receive remote signals.
