Touch
Use this parameter to adjust the keyboard touch sensitivity to your playing technique.
In “Function” mode, press the “Select” up or down arrows until the LED Screen displays, TOUCH:LINEAR
(factory default). To change the setting effect, press the
[+Next]
button to the next desired touch. Press the
[Prev -]
button down to reverse the steps. The following are the available settings:
Linear
Best Dynamic Range for instruments (Factory Default Setting).
Light 1/
For players with a light touch. Adjust this parameter to achieve a
good dynamic
Light 2
range.These settings are from Light 1, a slightly
light touch to Light 3, a very
Light 3
light touch.
Hard 1
For players with a heavier touch. Adjust this
parameter to achieve a good dynamic
Hard 2
range.
These settings are from Hard 1, a slightly harder
Hard 3
touch
to Hard 3, a very hard touch
.
Piano Touch
Best for piano dynamics.
Easy Touch
Light touch, especially for younger players.
GM Receive
Select this when playing General MIDI songs.
Pressing the[Prev -] [+Next] button pair together, will reset the effect
level back to factory default of Linear.
Tune
This parameter allows you to adjust the tuning to.other instruments or recordings.
In
Function
mode, press the Arrow Up or Down
[Select ]
button until the LED Screen displays, TUNE:0
(factory default is A - 440). To increase the tuning, Press the
[+Next]
button from 0 to 100 cents. To lower or
reduce the tuning Press the [Prev -] button from 0 to -100 cents. Pressing the
[Prev -] [+Next]
button pair
together, will reset the effect level back to factory default of 0 or A-440.
To save your desired Tuning setting, you must first exit the
Function
menu, then press and hold any of the
[Favorites]
buttons 1-6 to “Save” your setting.
MIDI Channel
This parameter controls the MIDI transmit channel used for Voice Mode.
In
Function
mode, Press the up or down
[Select]
button arrows until the
LED Screen displays , CHANNEL: 1 (Factory Default) You can select
Channels 1 through 9 and Channels 11 through 15. Channel 10 is
reserved for rhythm playback and Channel 16 for the metronome.
Pressing the [Prev -] [+Next] button pair together, will reset the MIDI
Channel back to the factory default of 1.
(See Chapter 11, MIDI, beginning on page 40.)
Chapter 8
FUNCTION MODE
TUNE: 0
LINEAR
CHANNEL: 1
33