Balance Split Volume
This parameter sets the volume between the two split sounds.
In
Split
mode, press the Arrow Up
[Select ]
button until you arrive at the screen display “VOL:0”. This is the
Split Balance Volume. Press the
[Prev -]
button from -1 to -9 to decrease the volume of the secondary
voice (left hand). Press the
[+Next]
button from +1 to +9 to decrease the volume for the primary voice
(right hand). The value range of this parameter is -9 to +9 with 0 being the factory default balance.
NOTE:
Pressing the
[Prev -]
or
[+Next]
button pair together will reset back to the factory default split
volume of 0. Press and hold
[Favorites]
buttons 1 -6 to save your setting.
Split Octave Transposition
This parameter sets the transposition of the secondary voice relative to the primary voice.
In “Split” mode, press the Arrow Up
[Select ]
button, until you arrive at the LED Screen display, XPOSE:0 ST.
To transpose the secondary voice up an octave, press the
Next (+)
button once, to move up an octave. (The
screen will display 12 ST).
Press the
Next (+)
button twice to move up 2 octaves. (The screen will show
24:ST). Toggle twice back to 0 for the default setting. To lower an octave, simply reverse the steps by pressing
the
Prev (-)
button to change octaves for the left hand or the secondary voice.
NOTE:
Pressing the
[Prev -]
or
[+Next]
button pair together will reset the octave back to factory default to 0. .
Press and hold
[Favorites]
buttons 1-6 to save your setting.
Saving and Changing Split Voices
There are two ways you can save a split voice along with your changes. Both are quickly executed
with just a couple of button presses. The first way is to select the
[Save]
button and enter the Save
Dialog, the second is using a
[Favorites]
button. To change a saved split voice, simply go back to the
saved
[Favorites]
location and make your change.
NOTE:
Changes to the Split Voice, Split Key, Split Volume, and Split Transposition are remembered for the
next time you want to use a split voice; but are not stored in memory. They return to their default settings
when you turn off the MP20. Be sure to save your changes as one of the Favorites!
Chapter 7
31
VOL: 0
SPLIT MODE