HCI RoomMate RM20II, Руководство по эксплуатации

Страница: 26 / 68

--------------------------------------------------------------------------------------GEN II OPERATIONS MANUAL
HealthCare Information, LLC 26
PILLOW SPEAKER Sets type of pillow speaker being used. Available settings will depend on the type of
pillow speaker board installed. If a pillow speaker board is not installed you will not be
able to set the pillow speaker type. Both jacks are the same when using a single pillow
speaker board. See pages 11-13 to identify the type of pillow speaker board installed.
See page 35 for additional information.
SINGLE PILLOW SPEAKER BOARD (VER. 1)
PILLOW SPEAKER TYPE Set the type of pillow speaker being used. Selections are:
VIS ST – SIP AND PUFF - 1 KEY – 3 KEY – ZENITH – RCA –
PHILIPS - ZEN-5V
VIS ST Visitor Station.
SIP AND PUFF Sip and Puff device.
1 KEY 1 button analog pillow speaker.
3 KEY 3 button analog pillow speaker
ZENITH Digital pillow speaker sending Zenith code.
RCA Digital pillow speaker sending RCA code.
PHILIPS Digital pillow speaker sending Philips code.
ZEN-5V Older digital pillow speaker sending Zenith code.
Provides 5VDC to operate the pillow speaker.
NOT DUAL PS This menu can not be accessed when using a single pillow speaker
board. Menu selection will be grayed out.
SINGLE PILLOW SPEAKER BOARD (VER. 2)
PILLOW SPEAKER TYPE Sets the type of pillow speaker being used. Selections are:
VIS ST – SIP AND PUFF - 1 KEY – 3 KEY – ZENITH -
PHILIPS - ZEN-5V
NOT DUAL PS This menu can not be accessed when using a single pillow speaker
board. Menu selection will be grayed out.
DUAL PILLOW The dual pillow speaker board allows the 1/4 inch and 6-pin jacks to be set of each
SPEAKER BOARD other. Volume level to each device can also be set independently or muted with out
affecting the other. TV volume is not affected but both are dependent on the volume
setting of the TV.
PS ¼ INCH TYPE Sets the type of pillow speaker being used for the ¼ inch pillow
speaker jack. Selections are:
1 KEY – ZENITH - PHILIPS - ZEN-5V – VIS ST
PS 6 PIN TYPE Sets the type of pillow speaker being used for the 6-pin pillow
speaker jack. Selections are:
1 KEY –3 KEY – ZENITH - PHILIPS - ZEN-5V – VIS ST -
SIP AND PUFF
SETUP PASSWORD Changes the password used to enter the setup menus.