HCC Technology POS80B Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 71

HCC Technology POS80B Скачать руководство пользователя страница 48

Thermal Printer Technical Manual

48

3

0

00

0

Double-height mode is OFF.

1

08

8

Double-height mode is ON.

4~6 -

-

-

Undefined.

7

0

00

0

Underline mode is OFF.

1

80

128

Underline mode is ON.

[Notes]

When  both  double-width  and  double-height  modes  are  set  (including  right-  and  left-side
character spacing), quadruple-size characters are printed.
The  printer  can  underline  all  characters  (including  right-  and  left-side  character  spacing),  but
cannot underline the space set by HT and 90° clockwise-rotated characters.
The thickness of the underline is that specified by FS -, regardless of the character size.
When some of the characters in a line are double or more height, all the characters on the line
are aligned at the baseline.
It is possible to emphasize the Kanji character using FS W or GS !, the setting of the last received
command is effective.
It  is  possible  to  turn  under  line  mode  on  or  off  using  FS  -,  and  the  setting  of  the  last  received
command is effective.

[Default]

n = 0

[Reference]

FS - , FS W, GS !

FS & Select Chinese character mode

[Name]

Select Chinese character mode

[Format]

ASCII

FS

&

Hex

1C

26

Decimal

28

38

[Description]

Select Chinese character mode.

[Notes]

When the Chinese character mode is selected, the printer checks whether the code is for Chinese
or not, then processed the first byte and the second byte if the code is for Chinese.
Character mode is automatically selected on the printer power.

[Reference]

FS ., FS C

FS - n Turn underline mode on/off for Chinese characters

[Name]

Turn underline mode on/off for Chinese characters

[Format]

ASCII

FS

-

n

Hex

1C

2D

n

Decimal

28

45

n

[Range]

0 ≤ n ≤ 2, 48 ≤ n ≤ 50

[Description]

Turn underline mode for Chinese characters on or off, based on the following values

[Notes]

The printer can underline all characters (including right- and left-side character spacing), but

n

Function

0, 48

Turn off underline mode for Chinese characters

1, 49

Turn on underline mode for Chinese characters (1-dot thick)

2, 50

Turn on underline mode for Chinese characters (2-dot thick)

«
...
46
47
48
49
50
...
»

Содержание POS80B








































































Отзывы:

Нет отзывов