HBS 94-31-412C, Руководство по эксплуатации, Страница: 36 / 62

©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
36
10 Preparing the Welding Head
Capacitor discharge with gap
‹
Make sure that you have inserted the pressure spring (order no. 80-10-
400) for the gap welding process and that the toggle switch for solenoid is
set to the ON position .
If not observed, you will obtain poor welding results.
Stud welding units
CDMi 2402 *) / CDMi 3202 / SCD 3201 /
CDi 1502 Autom.
Material
of welding elements
Diameter of welding elements Welding parameters
metric KAH 412
PT, UT IT
Lift
in mm
Spring force
in mm
Material of workpiece: Mild steel (suitable for welding)
4.8 (suitable for welding) M3, 3 mm -- 2.0 5
4.8 (suitable for welding) M4, 4 mm -- 2.0 5
4.8 (suitable for welding) M5, 5 mm 5 mm, M3 2.0 5
4.8 (suitable for welding) M6, 6 mm 6 mm, M4 2.0 5
4.8 (suitable for welding) M8, 7.1 mm 7.1 mm, M5 2.0 5
Material of workpiece: Galvanised steel (suitable for welding)
4.8 (suitable for welding) M3, 3 mm -- 1.0 5
4.8 (suitable for welding) M4, 4 mm -- 1.0 5
4.8 (suitable for welding) M5, 5 mm 5 mm, M3 1.0 5
4.8 (suitable for welding) M6, 6 mm 6 mm, M4 1.0 5
4.8 (suitable for welding) M8, 7.1 mm 7.1 mm, M5 1.0 5
Material of workpiece: Alloyed steel (suitable for welding)
A2-50 M3, 3 mm -- 2.0 5
A2-50 M4, 4 mm -- 2.0 5
A2-50 M5, 5 mm 5 mm, M3 2.0 5
A2-50 M6, 6 mm 6 mm, M4 2.0 5
A2-50 M8, 7.1 mm 7.1 mm, M5 2.5 5
Material of workpiece: Alloyed steel (suitable for welding)
CuZn37 M3, 3 mm -- 2.0 5
CuZn37 M4, 4 mm -- 2.0 5
CuZn37 M5, 5 mm 5 mm, M3 2.0 5
CuZn37 M6, 6 mm 6 mm, M4 2.0 5
CuZn37 M8, 7.1 mm 7.1 mm, M5 2.5 5
Material of workpiece: Aluminium
AlMg3 M3, 3 mm -- 2.5 5
AlMg3 M4, 4 mm -- 2.5 5
AlMg3 M5, 5 mm 5 mm, M3 3.0 5
AlMg3 M6, 6 mm 6 mm, M4 3.5 5
AlMg3 M8, 7.1 mm 7.1 mm, M5 4.0 5
*) 99 000 mF