HBM TOP-Z30A, Инструкция по монтажу

Страница: 43 / 72

43
TOP-Z30A/Z4A
A2212-1.0 de/en HBM
2 Application notes
Force transducer TOP Transfer
High precision force transducers in the type series TOP-Z30A and TOP-Z4A
measure compressive and tensile forces.
Because they measure static and quasi-static forces with extremely high
accuracy and reproducibility, they must be handled very carefully. Particular
care must be taken when transporting and installing the devices. Dropping or
knocking the transducers may cause permanent damage. It is recommended,
as the TOP Transfer force transducers are peak precision transducers for
transfer measurements, that the ambient temperature is maintained constant
in the range of the nominal temperature.
Force transducers TOP-Z30A and TOP-Z4A with DKD certificate:
The transducers are by default calibrated in the pressure direction. They
can also be DKD calibrated in the tensile direction on request. However, the
transducer should be loaded and used in one force direction only for high
precision measurements.
The technical data lists the permissible limits for mechanical, thermal and
electrical stress. It is essential that these are taken into account when
planning the measuring set-up, during installation and ultimately during
operation.
To achieve optimum measurement results, the transducer must be connected
to a highly accurate amplifier (e.g. DMP40 from HBM).