HBM TOP-Z30A, Инструкция по монтажу

Страница: 38 / 72

38
TOP-Z30A/Z4A
A2212-1.0 de/en HBM
Safety instructions
Intended use
The force transducers of TOP Transfer types: TOP-Z30A and TOP-Z4A must
be used for force comparison measurements (force transfer). Use for any
additional purpose shall be deemed to be not as intended.
In the interests of safety, the transducer should only be operated as described
in the Mounting Instructions. It is also essential to observe the appropriate
legal and safety regulations for the application concerned during use. The
same applies to the use of accessories.
The transducer is not a safety element within the meaning of its use as
intended. For safe and trouble-free operation, this transducer must not only be
correctly transported, stored, sited and installed but must also be carefully
operated and maintained.
General dangers of failing to follow the safety instructions
The force transducers TOP-Z30A and TOP-Z4A are state-of-the-art and
failsafe. Transducers can give rise to remaining dangers if they are
inappropriately installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a force transducer must have read and understood the Mounting
Instructions and in particular the technical safety instructions.
Remaining dangers
The scope of supply and performance of the transducer covers only a small
area of force measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of force measurement technology in such a way
as to minimize remaining dangers. Prevailing regulations must be complied
with at all times. There must be reference to the remaining dangers
associated with force measurement technology.