HBM TEDSdongle, Руководство по эксплуатации

Страница: 8 / 40

8 TEDSdongle
A2869 − 1.2 en/de HBM
1 Introduction
1.1 Scope of supply and accessories
Scope of supply:
•
1 TEDSdongle module
•
1 USB connection cable Order No.: 3 − 3301.0127
•
Ferrite element for USB connection cable
•
CD − ROM with free TEDS Editor software (the latest Assistant can be
downloaded free of charge under http://www.hbm.com/support)
•
Operating manuals: ”TEDSdongle”, ”TEDS data memory in transducer”,
”TEDS memory module for self-assembly” in this CD-ROM
Accessories:
TEDS modules and kits for self-assembly
Order No.
TEDS module, small, e.g. for assembly in suitable protective
housing in cable
1 − TEDS − BOARDS − S
TEDS module, wide, e.g. for assembly in Sub − D plug (15-pin)
1 − TEDS − BOARDS − L
TEDS module in kit with Sub − D plug (15-pin)
1 − TEDS − DP − 15P
Plug kit DSubHD 15-pin (male) with TEDS chip for storing a
sensor data sheet
1 − SUBHD15 − MALE
1.2 General Information
TEDS stands for ”Transducer Electronic Data Sheet”. Function and working
method are defined in Standard IEEE1451.4.
The sensor data are stored in a small TEDS chip or TEDS module. During
active measuring mode, amplifiers equipped with TEDS functionality can then
read the sensor data from the TEDS module and set themselves accordingly
automatically or via software command.
This enables rapid and secure measurement operation.