HBM TEDSdongle, Руководство по эксплуатации

Страница: 10 / 40

10 TEDSdongle
A2869 − 1.2 en/de HBM
Fig. 1.2: TEDSdongle complete with TEDS sensor and PC with TEDS Editor
NOTE
You need the HBM software TEDS Editor to operate the
TEDSdongle. This is available on the CD
− ROM provided or on the
Internet under http://www.hbm.com/teds.
TEDS sensors from various manufacturers can be used with the
TEDSdongle and the TEDS Editor.
Sensors can also be retrofitted and written to with TEDS modules
(see Chapter 1.1 Accessories).
A measuring amplifier or additional accessories are not
required for this purpose!
The TEDSdongle does not have any measurement
functionality!
Further information about TEDS and using TEDS can be found in the
operating manual ”TEDS data memory in the transducer − Contents and
editing data memory” (http://www.hbm.com/teds).