Mechanical installation
T40FH
A4429-3.0
HBM: public
27
Important
To avoid axial oscillation, a clamp fixture is enclosed with the torque transducer
to enable the antenna ring to be supported. There is a hole, 6.5 mm in diame
ter, on the upper antenna segment to receive the clamping device (see
Fig. 5.7).
The cable plug (not included in the scope of supply) also requires support in
this case; a construction example is shown in Fig. 5.9.
Fig. 5.7
Construction example for supporting the antenna ring
7. Fasten the clamp fixture with the enclosed bolted connection, as shown in
. Clamp a suitable support element (we recommend a Ø 3-6 mm
threaded rod) between the upper and lower parts of the clamp fixture and
tighten the clamping screws.
