HBM P3MBP, Инструкция по монтажу, Страница: 6 / 20

6
P3MBP Blue Line
A1710-3.3 en HBM
Symbol:
NOTE
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com-
plies with the requirements of the relevant EC directives (the declaration of
conformity is available at http://www.hbm.com/support/dokumentation).
Conversions and modifications
The pressure transducer must not be modified from the design or safety-
engineering point of view without our express agreement. Any modification
precludes liability on our part for any damage resulting therefrom.
Qualified personnel
The pressure transducer must only be installed and operated by qualified per-
sonnel strictly in accordance with the technical data relating to the safety
requirements and safety rules and regulations listed. It is also essential to
comply with the statutory and safety regulations relevant to the particular
application. This also applies to the use of accessories.
”Qualified personnel” means persons familiar with the installation, assembly,
commissioning and operation of the product who possess the qualifications
appropriate to their function.
Recalibration and repair
When you send the transducer for calibration or repair to HBM, please specify
the pressure medium used. Traces of the medium can always remain in the
measuring bore. We need this information to act adequately and, if required,
select the appropriate cleaning agent. If no medium has been specified, we
must possibly refuse to perform calibration or repair.