HBM P3MBP, Инструкция по монтажу, Страница: 4 / 20

4
P3MBP Blue Line
A1710-3.3 en HBM
Safety instructions
Use in accordance with the regulations
The P3MB pressure transducer is to be used exclusively for pressure measu-
rement and directly related control tasks. Any other use is deemed to be not
as prescribed.
To ensure safe operation, the transducer must only be used in accordance
with the specifications in the User Manual. It is also essential to comply with
the statutory and safety regulations relevant to the particular application. This
also applies to the use of accessories.
We declare that the transducer is in conformity with the requirements of the
European Pressure Equipment Directive 97/23/EC, directive of the European
Parliament and Council of 29 May 1997 on the approximation of the laws of
the member states concerning pressure equipment.
The pressure transducer is not a safety device as defined in the regulations
for use. The perfectly safe operation of this pressure transducer requires sui-
table transport as well as technically correct storage, installation and assem-
bly coupled with careful operation.
Use as a ”component with a safety function” does not come under appropriate
use and the user must assess this himself (in the sense of the Pressure
Equipment Directive 97/23/EC).
General dangers in non-observance of the safety instructions
The pressure transducer corresponds to the state of the art and is safe to
operate. The pressure transducer can give rise to residual danger if impro-
perly installed and operated by untrained personnel.
All personnel involved in the installation, commissioning, maintenance or
repair of the pressure transducer must have read and understood the User
Manual and in particular the technical safety instructions.
Accident prevention
Care must be taken to ensure that when the pressure transducer is being
installed or removed, there is no pressure in the circuit.
Residual dangers
The scope of the capabilities and components provided with the transducer
covers only a part of pressure measurement technology. Equipment planners,
installers and operators must plan, carry out and accept responsibility for the
safety engineering aspects of pressure measurement technology in such a
way that residual dangers are kept to a minimum.