manualshive.com logo in svg

HBM FS22 SI, Руководство пользователя, Страница: 53 / 116

Поделиться
Скачать
HBM FS22 SI Скачать руководство пользователя страница 53

Remote Communications

FS22 SI

A4249-8.0

  

HBM: public

53

YYYY:MM:DD

Date

Integer.

YYYY – year.

MM – month.

DD – day.

HH:MM:SS

Time

Integer.

HH – hours.

MM – minutes.

SS – seconds.

Q

NTP
Quality

Integer.

0 for “Not acceptable”,

1 for “Acceptable”

There are several possible answers with error messages:

:NACK:INVALID COMMAND

The command does not exist. Check if the spelling is
correct.

:NACK:COMMAND NOT ACCEPTED AT CURRENT
STATUS

It is not possible to execute the command sent at the
current status. Ask the current status of the interrogator
(:STAT?) and confer with scheme from 

Fig. 3.11

 to see

how to change it.

:NACK: '?' MUST BE THE LAST CHARACTER

The sent command should have a '?' at the end of the
command string.

:NACK:ARGUMENT OUT OF RANGE

The defined value for the parameter that is being config­
ured with the command is outside the possible interval.

Содержание FS22 SI





















































































































Отзывы:

Нет отзывов