manualshive.com logo in svg

HBM FS22 SI, Руководство пользователя, Страница: 28 / 116

Поделиться
Скачать
HBM FS22 SI Скачать руководство пользователя страница 28

Operation

28

A4249-8.0

  

HBM: public

FS22 SI

S

<2 ms: good

S

<5 ms: acceptable

S

<10ms: poor

S

>10ms: not acceptable

A successful NTP Sync is achieved if the offset between
the internal clock of the device and the NTP server is
below 5ms.

The quality of the NTP synchronization can be queried
using the SCPI commands (please refer to section “Syn­
chronization” on page 53 for further details).

3.5.4

Operation

The FS22 - Industrial BraggMETER SI interrogator can
be fully controlled using standard SCPI syntax com­
mands (for a complete command list, 

please refer to sec­

tion 5.1 “Communication Protocol Syntax” on page 51

).

Using the Provided Drivers

These drivers can be used within the LabVIEW

TM

 envi­

ronment. To develop custom applications using this
language, copy the drivers' library supplied on the CD.
A set of ready to use examples to run on LabVIEW

TM

 is

also provided.

Important

Before using the provided LabVIEW

TM

 examples on a

PC, make sure the Regional and Language options (in
standards and formats) are defined as dot for decimal
symbol, comma for digit grouping symbol and dash for
date separation.

Содержание FS22 SI





















































































































Отзывы:

Нет отзывов