HBM 1-C2A/M1BR/10TT, Инструкция по монтажу

Страница: 23 / 52

23
C2A/M1...
HBM A2174-1.0 de/en/fr
1 General
HBM offers the C2A/M1(L)BR... weighing module for C2A load cells with max.
capacities of 1 t ... 10 t. The ”L” in the type designation signifies that the mod-
ule has been fitted with a stay rod.
Product types C2A/M1(L)BR...
Order number
Max. capacity
for load cell
Material Version
1−C2A/M1LBR/5T
1 t ... 5t stainless steel
WITH stay rod
1−C2A/M1BR/5T
1 t ... 5t stainless steel
WITHOUT stay rod
1−C2A/M1LBR/10T
10 t stainless steel
WITH stay rod
1−C2A/M1BR/10T
10 t stainless steel
WITHOUT stay rod
The weighing modules have been primarily designed for use in tank weighing.
As a rule, the weighing modules are equipped with adjustable limit stops that
limit horizontal movements, for example by wind forces or in mixer operation.
In addition, the modules are provided with a anti-liftoff device which prevents
the tank from lifting off. However, ensure that the specified data (see chapter
5) are not exceeded.
The modules comprise a lower module plate for mounting on the basic
construction (foundations), a load cell dummy with load introduction elements
and the upper module plate for tank mounting. For load introduction into the
load cell a pendulum bearing is used which allows for horizontal shifting of the
load applied. The weighing modules are completely fitted with a load cell
dummy that can be loaded, with a ground cable, and a securing device for
transport.