HBM 1-C2A/M1BR/10TT, Инструкция по монтажу

Страница: 25 / 52

25
C2A/M1...
HBM A2174-1.0 de/en/fr
How to use the enclosed grease tube
NOTE
Before fitting the load cell, the enclosed grease must be applied to the
upper thrust piece and to the underside of the pendulum bearing in
order to minimize friction between the inside surface of the thrust piece
and the load introduction element of the C2A load cell or pendulum
bearing.
Use of the spacer plates provided
The scope of delivery of the module includes 2 x 5 spacer plates. They are
used for the vertical adjustment of the module. Five plates max. are to be
fitted underneath the upper module plate, and five plates max. between the
base and the cross bracket of the anti-liftoff device
Ensure that all screws are fitted with U-washers.
5 spacer plates max.
for height adjustment
5 spacer plates max.
for height adjustment
Upper module plate
Lateral stops
Cross-bracket
(Anti-liftoff device)
Mounting base
Bearing
Dummy
Air gap1 mm
Fig. 2.1: Fitting of the spacer plates with 5 t version