HBK Z6M, Инструкция по монтажу, Страница: 9 / 56

7
Z6/M
PRIOR TO MOUNTING
4 PRIOR TO MOUNTING
S
Care should be taken to ensure that all surfaces for siting and mounting are clean,
smooth and level. Depending on the mounting conditions, any leveling error can be
compensated for by using suitable wedges and compensation plates (permanently
welded) or by grinding away the mounting surface, for example.
Important
On no account must the module plates be ground.
S
The base or foundation frame must be sufficiently rigid to prevent unacceptable de­
formation under load (such as sagging).
S
In order to keep the mounting as free of constraining forces as possible, the fastening
holes on the foundation frame and container joint must be suitably aligned.
S
Every effort should be made to ensure uniform loading on the support points. Care
should be taken to adjust the height on the support points correctly (compensating
shims need to be available). This is especially important in the case of statically unde­
fined supports.