Assembly Instructions M8095-EN
M8095-EN 2020-09
5/13
Fig. 6: Reset complete
9.
Carrying out a Complete reset
(Software version prior to SW51-1 0849B)
Service \ Support
using
"Support" user profile
(From software version SW51-1 0849B onwards)
Service \ Configuration
using "Support" user profile
NOTICE!
From software version SW51-1 0916 onwards, the
Service \ Configuration
menu is accessed using the
code
1?2?
.
Fig. 7: Configuration
10.
Configure unit
(to Software Version SW51-2 1431)
Service \ Configuration
menu using the “Support” user profile.
NOTICE!
When configuring note the following:
- Select product group according to table below
- Check data on the nameplate
- Read appendix of Operating Manual
(for special versions)
Product group Product type
TG
Thermo-5 temperature control unit
TR
Treat-5 water treatment unit
CL
Clean-5 cleaning unit
Fig. 8: Input window configuration
(from Software Version SW51-2 1449)
NOTICE!
As of software SW51-2 1449, the configuration is
requested after power ON automatically via the
input window
(
Fig. 8).
