Assembly Instructions M8095-EN
M8095-EN 2020-09
4/13
Fig. 3: Voltage selection GIF-51
5.
Voltage selection at X 15 with bridge plug (O/ID T21608):
Verify mains voltage (
specification on the nameplate)
Place bridge according (
Fig. 3)
ATTENTION!
Danger if wrongly connected
Wrong voltage selection or wrong connections can
damage the unit
Therefore:
– Thoroughly check connections and voltage
selection
6.
Close and secure the front panel.
7.
Reconnect mains plug and switch on main switch.
NOTE!
The unit will maybe perform an automatic software
update.
Fig. 4: Input window configuration
NOTICE!
If configuration is incomplete, the warning text
"Wrong entry" will be displayed. By cancelling the
configuration, the user can exit configuration mode
and subsequently conduct a Reset complete.
Fig. 5: Software version display
8.
Checking the software version
NOTICE!
You can verify the currently installed software
version using the
button on the basic screen.
The software version is indicated in the top right
corner (
Fig. 5).
Software version designation:
Ex.
SW51-2 18 45 A
Index (optional)
Calendar week
Year
X 15
