H A Z E T- W E R K
HÖCHSTE TECHNOLOGIE IN DER WERKZEUGFERTIGUNG SEIT 1868
HIGHEST TECHNOLOGY IN TOOL MANUFACTURE SINCE 1868
Instruction manual
3W LED lamp
1979-7
q
Professional Working Lamp with the latest Chip-On-Board (COB) LED technology is power saving and can be used for a
wide range of purposes. Car workshop, garage, automobile, warehouse, household and in many other areas.
Function and description of the LED lamp:
- Spotlight on top of the housing
- Robust and splash-proof plastic housing with rubberized surface
- 180° rotatable in eight steps, lockable lamp handle for a fl exible light alignment
- Two extendable 360° rotatable hooks on the rear of the housing
- Two magnets on the rear of the housing and one magnet on the bottom of the handle
- Built-in NiMH battery pack (3.7V / 2200 mAh)
- Rechargeable via AC/DC mains power supply (100V-240V) or car adapter (12V-24V)
- Charging indication via coloured LEDs
TECHNICAL DATA
Integrated lights: _________________________ Main Lamp: 3W COB LED
Spotlight: _______________________________ 3W Digital White LED
Brightness: _____________________________ 590 lux / 0.5m distance
Luminious fl ux: __________________________ 275 lumens
Operating time: __________________________ pprox. 3,5h (main lamp), approx. 7h (spotlight)
Input voltage external power supply: _______ 100-240V AC / 50-60Hz
Input voltage car adaptor:_________________ 12-24V DC
Charging current: ________________________ 5V / 500mA
Charging time: __________________________ approx. 4h
Protection class LED lamp: _______________ IP54
OPERATION
The on/off switch of the Working Lamp is located on the front of the housing:
- Press 1 time: The Main Lamp of the housing is switched on.
- Press 2 times: The Main Lamp is switched off and the Spotlight on top is switched on.
- Press 3 times: Both Spotlight on top switched off.
CHARGING PROCESS
Before fi rst use, the lamp should be fully charged. The lamp should also be fully charged before being stored for a longer
period of time.
The following charging options are available:
- Via AC/DC mains power supply plugged into a mains socket
- Via car adapter in the cigarette lighter socket of a car/truck
To charge the lamp, remove the rubber cap from the hollow plug socket on the rear of the Working Lamp and insert the
round plug of the AC/DC power supply or car adapter. Then connect the AC/DC power supply/car adapter to a mains
socket/cigarette lighter socket.
The battery should only be charged with the charger supplied by the manufacturer. To avoid damage, please do not use any
other chargers. When not in use, the charging cable must be unplugged from the outlet. Keep the lamp in a dry place away
from direct sunlight. The lamp must be protected against high humidity and water.
Charging indication via coloured LEDs:
- Battery is charging: The LED lights red
- Battery is fully charged: The LED lights green
150
Lumen
275
Lumen
3,5 h
7 h
12 – 24 V DC
100 – 240 V AC
15
0 L
ED
15
0
LE
D
COB LED
=
CREE LED
3 W
3 W
4 h
IP 54
IK 07
1979-7 AH I de en.indd 3
1979-7 AH I de en.indd 3
02.07.14 15:32
02.07.14 15:32
