Warning
Electrical energy can cause serious injuries.
In order to avoid electrical shock, injuries or fi re the
following safety instructions have to be observed and
respected:
• Please make sure that lead and housing are not dam-
aged. Lights and charging stations that have been
dropped or that are damaged, must be checked by
qualifi ed personnel before restarting operation.
• When laying the power supply lead, please make
sure that it does not come into contact with hot or
sharp parts and that it cannot be damaged in another
way. The lead is to be laid in such a way that it does
not constitute a risk of stumbling.
• The LED lamp must not be exposed to water or other
liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by
qualifi ed technical personnel only. In order to ensure
the working reliability in the long term, always use
original spare parts.
• The LED lamp must not be disassembled. Inap-
propriate assembly can lead to a reduction of the
functionality, to fi re, to electrical shocks and/or to
injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is
strong enough to cause eye injuries.
• If an extension cord is necessary, it must be
suffi ciently dimensioned for the charging station.
Cables which are not appropriate for the necessary
amperage may overheat.
• When recharging, both the LED lamp and the charg-
ing station slightly warm up which does not reduce
their functionality. When working with the work light,
appropriate caution is required.
• Only use the LED lamp within the prescribed places,
and governed under the current regulations relating
to the working environment and to electrical systems.
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.
Warranty
Any deviation from the intended use is not allowed
and will be considered as improper use. Improper use
means:
• Products that have been modifi ed or repaired by
persons not belonging to HAZET.
• Misuse, improper handling, negligence and any devia-
tion from the intended use or from the instructions
and specifi cations of HAZET or
• Use in combination with any other product, device,
component or system that is damaged, may cause
malfunction or is not intended for use in combination
with this tool.
EC Declaration of Conformity
Product: LED lamp
Article No.: HAZET 1979-7
We declare that the above designated product is in
compliance with the following European Community
Directives: Furthermore we declare that the product is
in compliance with the following standards:
*2011/65/EU (RoHS II), Electromagnetic Compatibility
2004/108/EC and Low Voltage Directive 2006/95/EC as
well as the Ecodesign Directive 2009/125/EC
Date: June 27, 2014
Hermann J. ZERVER
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstr. 25-29
42857 Remscheid
1979-7 AH-
I
06.14/
∞
330
2
For Your Safety
Never look straight into the light.
The light intensity is strong enough to cause eye injuries.
1979-7 AH I de en.indd 4
1979-7 AH I de en.indd 4
02.07.14 15:32
02.07.14 15:32
