HAZET-WERK 9212-2, Руководство по эксплуатации

Страница: 17 / 24

17
Always wear personal protective clothing and safety equipment!
2 For your safety
• Ensure that the working area is clean, well
ventilated and always well lit.
• Never use the tool whilst under the influ-
ence of alcohol or drugs.
• Repairs may be performed by authorised
personnel only.
• Do not clean plastic parts with solvents.
• Solvents such as petrol, benzene, carbon tetra-
chloride, and alcohol can deform or crack the
plastic parts. Do not come in contact with the
above-mentioned solvents.
• When working on elevated places always make
sure that no one is located below the work area
before you commence work.
Important safety instructions for
the quick charger
• This section contains important safety and
operating instructions for the quick charger.
•
Before commissioning the charger,
please read all instructions
and markings
on the
1. charger,
2. battery,
• Never expose the charger to rain or snow.
• Operating temperature for Li-Ion batteries:
-10 to +40 °C for discharging
0 to +40 °C for charging
• Operating temperature for charger:
0 to +40 °C
• To avoid electric shock, disconnect the charger
from the socket before cleaning or beginning
maintenance work. Removing the battery does
not reduce the hazard.
• Any non-approved use of the charger may
result in serious injury.
To avoid these hazards:
• Never disassemble the battery
• Never throw batteries into a fire even if it these
are damaged or completely depleted. Risk of
explosion!
• Never short-circuit the battery.
• Never push objects into the ventilation holes of
the charger, otherwise you risk electric shock
or damage to the charger.
• Never recharge the battery outdoors.
• Never expose the battery to direct sunlight.
• Recharge only in well-ventilated areas with low
humidity.
• Never recharge the battery when the tempera-
ture is below 0°C (32°F) or above 40°C (104°F).
• Never combine two chargers.
• Never plug objects into the battery holder.
• Never use an amplifier transformer when char-
ging.
• Never use a motor generator or DC power to
recharge.
• Never store the battery and charger where the
temperature can reach 40°C (104°F).
• Always use the charger with 230 V
standard electrical connections.
Using the charger at higher voltages can cause
overheating and damage the charger.
• Always take at least 15 minutes of wait time
between multiple recharges to avoid overhea-
ting the charger.
• Always disconnect the charger from the power
source when not in use.