25
Disconnecting the battery:
• Press the safety lock and pull the battery
from the tool handle.
HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29
•
42857 Remscheid
•
GERMANY
[
+49 (0) 21 91 / 7 92-0
•
\
+49 (0) 21 91 / 7 92-375
•
^
hazet.de
•
]
Charge capacity indicator
Status
1
LED 1
0 - 25 %
2
LED 1, 2
26 - 50 %
3
LED 1, 2, 3
51 - 75 %
4
LED 1, 2, 3, 4
76 - 100 %
Before commissioning:
• Clean up the work area.
• Keep unauthorised persons out of the work area.
• Ensure adequate lighting and ventilation in the workplace.
• Make sure that the battery is properly installed and locked into place.
Adjusting the direction of rotation:
• The direction of rotation is set by the reversing switch.
The direction of rotation cannot be altered when the impact wrench is running.
To change the direction of rotation, you must stop the impact wrench and
then press the changeover switch to change the direction of rotation
.
3
Design and function
Attaching the rechargeable battery:
• Insert the battery until it locks with a click.
• If it is not engaged, the battery can fall off the tool, become destroyed and/or cause
injury to you or bystanders.
• The rechargeable battery is equipped with a charge indicator. The 4-stage LEDs (green)
display the remaining capacity.
• Pressing the control button displays the battery's state of charge for 5 seconds.
• The battery has built-in overheating protection and protects the HAZET cordless impact
wrenches and the battery from overheating. When the max. temperature of 70 °C is
reached, the battery automatically shuts down and the HAZET cordless electric drill can
no longer be operated.
Electrical energy may cause serious injuries!
Always wear personal protective equipment!
