HAZET-WERK 9212-1000, Руководство по эксплуатации

Страница: 18 / 32

18
^
hazet.com •
]
info@hazet.de
^
hazet.com •
]
info@hazet.de
• The HAZET cordless impact wrench is a
handy, battery-operated tool for handiwork
and DIY jobs. It is used to loosen and tighten
screw connections and is equipped with an
MD limit.
3 torque tightening stages:
- Stage 1 = 180 Nm
- Stage 2 = 400 Nm
- Stage 3 = 1000 Nm
• The device must only be used if it is in
good working condition.
• All safety equipment must always be within
reach and should be checked regularly.
• Any incorrect use of the cordless
impact wrench or use that fails to
comply with the safety precautions can
result in serious injury or even death.
• Any other kind of use and/or use that goes
beyond the intended use of the tool is pro-
hibited and is
deemed to be improper.
• Any claims against the manufacturer
and/or its authorised agents because of
damage caused by improper use of the tool
are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the operator.
NOTE
Every screw connection must be
tightened/checked with a suitable
torque wrench.
1. Owner's
liability
• The tool was developed and manufactured
according to the technical norms and stan-
dards valid and recognised at the time and
is considered to be operationally reliable.
Nevertheless, the tool may present a dan-
ger when it is not used as intended or in
an inappropriate way by non-qualified per-
sonnel. Please make sure that any person
using this tool or carrying out maintenance
work carefully reads and fully understands
these operating instructions before using
the tool.
• Any modification of the tool is strictly for-
bidden.
• All safety, warning and operating instruc-
tions on the tool must be kept legible at all
times. All damaged labels or stickers must
be replaced immediately.
• All specified set values or ranges must
be observed.
• Always keep the operating instructions
close to the tool.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regularly.
2. Intended use
Operational reliability is only guaran-
teed if the device is used as intended
in accordance with the information
provided in the operating instructions. In addi-
tion to the safety advice in these operating
instructions, the general safety regulations,
regulations for the prevention of accidents and
regulations for environmental protection valid
for this tool's application range must be obser-
ved and respected. Use and maintenance of
the tool must always comply with relevant local
and national regulations.
• Keep the operating instructions together
with the device at all times.
2
For your safety
Electrical energy may cause serious injuries!
Always wear personal protective equipment!