HAZET-WERK 9212-1000, Руководство по эксплуатации

Страница: 19 / 32

19
HAZET-WERK Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-375 •
^
hazet.de •
]
info@hazet.de
3. Dangers that may arise
from using the tool
Check the full functionality HAZET cordless
impact wrench b efore each use . If its function
is not guaranteed after this test or if damage
is discovered, do not use the impact wrench.
If full functionality is not guaranteed and the
impact wrench is still used, this poses a risk
of serious injury, health problems and material
damage.
Electric energy may cause serious injuries to
persons. The following safety instructions must
be observed and adhered to in order to avoid
electric shock, injuries or fire:
• Ensure cable and housing are not damaged.
Tools/chargers that have been dropped or
damaged must be checked by qualified per-
sonnel before restarting operation.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• When laying the power supply lead, ensure it
does not come into contact with hot or sharp
parts and that it cannot be damaged in ano-
ther way. The lead is to be laid in such a way
that it does not constitute a trip hazard.
• The charger and impact wrench must not be
exposed to water or other liquids. Dangerous
voltage discharge may occur.
• Keep unused rechargeable batteries away
from metallic objects such as paper clips,
coins, keys, nails, screws, etc. These objects
can establish a connection between the
poles and cause a short-circuit, which can
cause sparks, flames or fires.
• The charger and/or the impact wrenches
must not be disassembled. Inappropriate
assembly can lead to a reduction of the
functionality, to fire, to electric shocks and/
or to injury.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or hou-
sing parts.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
If an extension cord is necessary, it must
be sufficiently dimensioned for the charger.
Cables which are not appropriate for the
necessary amperage may overheat.
• The battery may only be recharged with the
explicitly intended charger. A charger that is
designed for a different type of rechargea-
ble battery can cause a fire in this type of
rechargeable battery.
• Only use the tool with the specified battery.
Use of any other battery may cause a fire.
• The rechargeable battery and the charger
heat up slightly during charging. This does
not reduce their functionality. Appropriate
caution is required for operation.
• Only use the cordless impact wrenches in
places that are governed and regulated by
applicable provisions for work areas and
electrical systems.
• For safety reasons, any modification to
HAZET cordless impact wrenches is strictly
forbidden. Any modification of the tool will
result in immediate exclusion from warranty
and liability.
2
For your safety
Electrical energy may cause serious injuries!
Always wear personal protective equipment!