HAZET-WERK 4954-2, Руководство по эксплуатации

Страница: 15 / 24

15
3. Dangers that may
arise from the tool
• Before each use, check the HAZET tool for
full functionality. Do not use the tool set if its
functionality cannot be ensured or if damage
is detected. If the tool is used when it is not
in full working order, you risk severe injuries
to persons and damage to property.
• Electric energy may cause serious injuries
to persons. The following safety instructions
must be observed and adhered to in order to
avoid electric shock, injuries or fire:
• The connecting cables and housing must
not be damaged. Tools/chargers that have
been dropped or damaged must be checked
by qualified personnel before being used
again.
• Never use tools with a defective on/off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired.
• The cables must not touch hot or sharp
parts or become damaged in any other way.
The cables must be laid in such a way that
they do not present a tripping hazard.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long­term
operational safety.
• Safety devices and/or cover parts may not
be removed.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect working
order.
• Only use the tool within the prescribed plac­
es, and governed under the current regula­
tions relating to the working environment
and to electrical systems.
• For safety reasons, any modification to the
HAZET tool is strictly forbidden. Any modifi­
cation of the tool set will result in immediate
exclusion from express or implied warranty
and liability.
Wear working gloves
and safety glasses.
• Keep children away from HAZET tools.
Unattended tools could be used by unau­
thorised persons and could cause injury to
them or to other persons.
• Do not use the tool in an explosive atmos-
phere.
Electric tools can cause sparks or
ignite combustible materials.
• Stop using any tool immediately if you
feel unwell or jittery or if you start feeling
pain.
• Make sure that the working area is clean,
well ventilated and always well lit.
•
Never use the tool whilst under the influ-
ence of alcohol or drugs.
• Repairs must be performed by authorised
personnel only.
• Do not clean plastic parts with solvents.
• Solvents such as petrol, benzene, carbon
tetrachloride, and alcohol can deform or
crack the plastic parts. Do not come in con­
tact with the above­mentioned solvents.
[
+49 (0) 21 91 / 7 92­0 •
\
+49 (0) 21 91 / 7 92­375 •
^
hazet.de •
]
info@hazet.de
2
For your safety
Electrical energy may cause serious injuries!
Always wear personal protective equipment!