When operating the hydraulic spindle, do not reach into the pulling device
and/or into the lateral housing openings. Otherwise you risk serious injury.
17
1
For Your Information
1. General Information
• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all information given
before they are used.
• These operating instructions contain impor-
tant advice that is necessary for a safe and
trouble-free operation of your HAZET Wheel
Bearing Extractor Tool.
• For effective use of the tool set as intend-
ed, it is essential that all safety and other
infor mation in these operating instructions
is adhered to.
• For this reason, always keep these operating
instructions together with your HAZET Wheel
Bearing Extractor Tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasizes that
any modification to the tool and/or use on an
application not detailed to its intended appli-
cation are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper or inappropriate application,
misuse of the tool or a disregard of the safety
instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents valid for the application area of this tool
must be observed and respected.
2. Explanation of Symbols
ATTENTION:
Please pay attention to these
symbols!
Read the Operating Instructions!
The user/owner of this tool is obliged
to observe the operating instructions
and should ensure all users of this
tool set use it according to the infor-
mation given in this manual.
NOTICE!
This symbol marks advice which is
helpful when using the tool.
CAUTION!
This symbol marks important specifi-
cations, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol marks advice which if
disregarded results in damage, mal-
function and/or functional failure of
the tool.
TOOL MAY BE USED BY QUALIFIED
PERSONNEL ONLY.
Disregard may lead to injuries to
persons or damages of the tool or
the workpiece.
