When operating the hydraulic spindle, do not reach into the pulling device
and/or into the lateral housing openings. Otherwise you risk serious injury.
28
4
Maintenance and Cleaning
223352
III
.
11.2014
/
0.5
be/mc
1. Maintenance and Cleaning
•
Always keep tool clean. Do not use degreasing agents or water for cleaning as they lead to
corrosion.
• For any information or for spare part ordering, please always indicate article number of the tool
.
• Control,
maintenance and repair work must be exclusively carried out by the manufacturer.
• Grease the threaded spindle before each use.
2. Spare Parts
• Only use the manufacturer’s original spare parts.
• Unsuitable or defective spare parts may cause damage, malfunction or total failure of
the tool.
• The use of unapproved spare parts will void all warranty, service and liability
claims as well as all claims for compensation against the manufacturer or its agents,
distributors and sales representatives.
3. Storage
The tool has be stored
according the following conditions:
•
Keep tool in a dry and dust-free place.
•
Do not expose the tool to liquids or aggressive substances.
•
Do not store the tool outdoors.
•
Keep tool out of reach of children.
•
Storage temperature: -10°C to +45°C
•
Relative air humidity: max. 60%
4. Disposal
• For disposal, clean tool and disassemble it according to the regulations for work safety and
environmental protection. Components can be recycled.
• Metal components can be scrapped.
