background image

THE FAB

2. Safety instructions

Very hot steam escapes from the mist outlet. Caution: Danger of burns!

During the fogging process, very hot fluid droplets may occasionally escape
from the fog outlet opening. Therefore, there must be no persons or
heat-sensitive objects within a distance of 1.5 m from the fog outlet
opening.

Never handle the mist outlet during operation or when activated.

The device must be set up in a place that is not sensitive to heat. Keep a
minimum distance of 60 cm from flammable, combustible and heat-sensitive
objects.

The fogging fluid used contains a glycol which burns with a slightly bluish,
almost invisible flame. Therefore, never fog into strong ignition sources such
as open fire.

Never open the device connected to a power source.

During operation, sporadic leakage of hot fluid droplets is possible. Care
should therefore be taken to ensure that these cannot become a hazard to
people. Keep a safety distance of 3m to the fog outlet nozzle.

Do not ingest the fog fluid and keep away from children. In case of eye
contact, rinse with plenty of water. In case of accidental ingestion, consult a
doctor.

Spilled or splashed fluid can cause slipping hazards. Absorb the fluid and
dispose of it in accordance with the regulations.

Do not let visibility drop below 2m, you are responsible for people moving in
the foggy room.

The mist produced can set off smoke detectors.

The method used here to generate artificial fog is largely harmless and is used
worldwide in the entertainment sector. We are not aware of any case in which a
healthy person has been harmed by the use of this artificial fog.

Nevertheless, we recommend that ill persons or persons with previous
damage to the respiratory tract or tendencies to allergies avoid contact
with artificial fog !

4

Содержание THE FAB





























Отзывы: