background image

19

Use Only Genuine Hayward Replacement Parts.

Important!

Retain Your Bill of Sale For Proof of Warranty Eligibility

To the Original Retail Consumer / Purchaser (the

“PURCHASER”) of the Hayward Viio Automatic Pool

Cleaner (the CLEANER”).

Hayward Pool Europe. (“HAYWARD”) warrants the

parts for One (2) year from the date of original purchase

(excluding the bag and sweep hose which are normal

replacement parts).

The Hayward Booster Pump is excluded in this

warranty and carries its own separate warranty.

SHOULD THE CLEANER FAIL TO BE IN GOOD

WORKING ORDER IN ACCORDANCE WITH THE ABOVE

SCHEDULE, HAYWARD WILL AT ITS OPTION REPAIR

OR REPLACE THE CLEANER OR ANY DEFECTIVE

PARTS AT NO ADDITIONAL CHARGE EXCEPT AS SET

FORTH BELOW. REPAIR PARTS AND REPLACEMENT

PRODUCTS WILL BE FURNISHED ON AN EXCHANGE

BASIS AND WILL BE NEW OR FUNCTIONALLY

EQUIVALENT. ALL PARTS REMOVED AS A RESULT OF

REPLACEMENT SHALL BECOME THE PROPERTY OF

HAYWARD. LIABILITY OF HAYWARD AND THE SOLE

REMEDY OF THE PURCHASER WHETHER IN

CONTRACT UNDER ANY WARRANTY, IN TORT

(INCLUDING NEGLIGENCE), IN STRICT LIABILITY OR

OTHERWISE, SHALL BE LIMITED TO THE REPAIR OR

REPLACEMENT OF DEFECTIVE PARTS ONLY AND

SHALL IN NO EVENT EXCEED THE RETURN OF THE

AMOUNT OF THE PURCHASE PRICE PAID BY THE

PURCHASER.

THIS LIMITED WARRANTY IS SUBJECT TO THE

FOLLOWING TERMS AND CONDITIONS:

1.

This Limited Warranty shall not apply to damage

caused by failure to perform normal maintenance

on the CLEANER (e.g. monitoring pressure/flow and

replacing a worn bag and sweep hose).

2.

This Limited Warranty shall be void if the CLEANER is

modified in any respect, including, but not limited to

the use of any parts other than Genuine Hayward Parts.

3.

This Limited Warranty shall not apply to any injury,

loss, damage, defect or malfunction of the CLEANER

or failure of the CLEANER to function resulting from

any failure to operate or maintain the CLEANER in

accordance with the directions contained in the

Owner’s Guide provided by HAYWARD or any injury,

loss, damage, defect, malfunction or failure to

function resulting from any misuse, unreasonable

use, tampering, abuse, accident, act of God,

alterations in the CLEANER by anyone other than

HAYWARD including but not limited to such

damages or injuries to parts resulting from improper

installation or damage to pump parts resulting from

running pump dry (e.g. interruption in or inadequate

supply of water to the Booster Pump, or obstruction

in lines, or otherwise); or damage, defects, or

malfunctions resulting from defects in, failure or

malfunction of, or negligence, abuse, or misuse with

respect to equipment other than the CLEANER.

4.

This Limited Warranty shall not apply to the

malfunction of, damage to, materials failure in, or

changes in the appearance of the CLEANER

resulting from exposure to sunlight or chemicals or

chemical reactions to substances with which any

part of the CLEANER may come in contact or parts

if worn, do not affect performance of the CLEANER.

5.

This Limited Warranty does

not

apply to cleaners

used for commercial purposes.

6.

The CLEANER is designed to function in a properly

designed, constructed and maintained pool. The

Limited Warranty does

not

apply in the

circumstances where the pool’s design, construction

or maintenance is defective, substandard or

inappropriate for the CLEANER’S operation.

7.

Deterioration, discoloration or brittleness of pool

plaster and vinyl liners can be caused over time

separately by, or in combination with, algae and an

imbalance in pool water chemistry, improper

installation, and other factors.

Limited Warranty

Содержание Viio Turbo AE5500

























Отзывы: