Hayward Viio Turbo AE5500, Руководство пользователя

Страница: 10 / 24

8
Use Only Genuine Hayward Replacement Parts.
Connecting the
Rigid Pressure Hose to Pool
7. Lubricatetheswivelonthe0.91mHoseWallEndAssembly(Part
T)insoapywaterthensnapintooneofthePipeAssemblies.
8. Lubricate the swivel on the Hose Cleaner End Assembly (Part
S) in soapy water then snap into a different Pipe Assembly.
9. Open Bag #2 and lubricate both ends of the Hose Swivel
Assemblies (Part R) in soapy water. Connect the Pipe
Assemblies by snapping the Hose Swivel Assemblies into
each of the Pipe Assemblies.
Connecting Hose to Wall Fitting
1. With the Booster Pump and Filtration system turned
OFF , look down from the pool deck and hold the Wall
Quick Connect so the hose is to the left and the
adjustment knob is to the right. Insert the Wall Quick
Connect into the Universal Wall Fitting and turn it to
the left (counter clockwise) to lock. The hose should
be on the bottom below the adjustment knob.
2. Pull the Wall Quick Connect outward to check that
the Wall Quick Connect is locked into the Universal
Wall Fitting.
3. To disconnect the hose, first turn the Booster Pump
and Filtration pump OFF then push the Wall Quick
Connect toward the wall, turn it to the right
(clockwise) and pull the Wall Quick Connect out of the
Universal Wall Fitting.
Disconnecting a Hose Pipe
If it is necessary to shorten, lengthen or replace a
component of the Rigid Pressure Hose, the Snap Fits can
be undone with two small screwdrivers.
Wall Quick Connect
Wall Connector Assembly
Hose Cleaner End Assembly
T Q N
Hose Swivel Assembly
R N
Rigid Pressure Hose Assembly
S
It is essential that the Hose Swivel Assemblies are
installed correctly to ensure tangle free operation of
the Viio Turbo.