Hayward TriStar SP322063EEV, Руководство пользователя

Страница: 9 / 16

TriStar Variable Speed Pump Control ____ ____________________________Page 9 of 16
WWW.HAYWARDPOOL.COM USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
VARIABLE SPEED INTERFACE – INSTALLER SETUP CHART
Event Performed function Keypad active functions Display message
Normal operation
– any mode except
prime
Operate according to
active mode with %
flow set for this mode
and for preset time. Press 3 and 4 simultaneously for
more than 5 seconds to enter
setup mode. The current active
mode is continued without any
change or interruption. *SETUP–MAIN MENU
SETUP mode User keypad and
display are in setup
mode. The current
active pump mode is
continued without any
change or interruption. Press 1 (Exit) to exit setup.
System will return to current
active mode and current preset is
displayed, for example “P2.LOW
FILTER”.
P2. LOW FILTER
(for example)
SETUP mode
(continued) (as above) Press 5 (Next) or 2 (Prev) to
scroll through all available main
menu options. See display for
current menu option.
*LANGUAGE SETUP
*CLOCK/TIMER
*PRIME HEIGHT
*PRESET SETUP
*SEQUENCER
*RANGE SETUP
*HARDWARE SETUP
*CONTROL SETUP
SETUP mode
(continued) (as above) Press 6 (OK) to enter selected
menu option, for example
“LANGUAGE SETUP”.
Press 1 (Exit) to exit the menu.
*LANGUAGE SETUP
*ENGLISH
SETUP mode:
LANGUAGE
SETUP
function
This feature allows
setting desired
language of displayed
messages. Press Time Up/Dn buttons to
select desired language.
Press 6 (OK) to store current
settings.
*ENGLISH
*ESPANIOL
*FRENCH
*ENGLISH SET!
SETUP mode:
CLOCK/TIMER
function
This menu allows the
user to set the current
day of week and time
of day, as well as
enable or disable the
timer function, and
define the timer “on”
and “off” time. To change day of week or time of
day, confirm by pressing 6 (OK)
button. An underlining cursor
will appear below day­of­week
value.
Press 5 (Next) or 2 (Prev) to
select either day­of­week, hours,
or minutes with underlining
cursor. Press Time Up/Dn
buttons to change selected value.
Pressing 6 (OK) causes system to
store preset current time.
Pressing 5 (Next) allows the user
to enable or disable the Timer.
Use Time Up/Dn buttons to select
between Timer Enable or Timer
Disable. Pressing 6 (OK) causes
system to store this option.
*SET Sun 7:36pm
(for example)
*SET Sun 7:36pm
*SET Sun 7:36pm
*SET Sun 7:36pm
*CLOCK SAVED!
*TIMER ENABLED
*TIMER DISABLED
*TIMER SAVED!