USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 27 of 32
Super Pump VS Variable Speed Pump
IS26115VSP Rev-A
9.6.
Replacing the Motor Assembly
13.
Slide the motor assembly, with the diffuser in place, into pump/strainer housing, being careful not to disturb the
diffuser gasket.
14.
Fasten assembly to pump/strainer housing using the four (4) 3/8" x 2" bolts. (Be sure housing gasket is in
place, and lubricated. Replace if damaged). Tighten bolts alternately and evenly to 80 inch-pounds. Looking at
the back of the pump, start with the top right, move diagonal to the bottom left, then up to the top left and last
across to the bottom right.
10.
Replacement Parts
10.1.
Parts Diagram
Figure 10.1-1
10.2.
Parts Listing
Ref.
No.
Part No.
Description
Qty.
1
SPX1600PN
Swivel Nut & Hand Knob
2
2 SPX1600D
Strainer
Cover
1
3
SPX1600S
Strainer Cover Gasket
1
4 SPX1600M
Basket
1
5
Spx1700FG
Drain Plug With Gasket
2
