Hayward ONCOM Скачать руководство пользователя страница 8

Страница: 8 / 32

Programming Menu Flowchart

The OnCommand’s five menus have many items that allow you to customize the operation of your pool/spa

equipment. The chart below shows the OnCommand’s menus as well as each menu’s specific settings.

Remote Menus

Enabled

Toggle between Enabled (default) and Disabled Remote Menus
Move to previous/next configuration menu

This feature will prevent unauthorized access to the Settings, Timers, and Configuration menus from

any of the OnCommand’s remote display/keypads. When disabled, the remote display/keypads will

only show the default menu and allow on/off control via the pushbuttons. Note that the function of

the OnCommand’s built-in display/keypad is unchanged by this selection. Once disabled, the only

way to enable “Remote Menus” is to use the local display/keypad.

All Timeclocks

7-day

Move to previous/next configuration menu

Toggle between 7-day (default) and Weekend/Weekday time options

This selection affects ALL of the timeclock logic in the OnCommand. If “7-day” is selected, each

timeclock will have one set of turn-on/turn-off settings that operate every day of the week. If “Weekend/

Weekdays” option is selected then the user can enter one set of turn-on/turn-off times for the weekend

(fixed as Saturday/Sunday) and another set of turn-on/turn-off times for weekdays (Monday through

Friday).

Time Format

12 hour AM/PM

Units

ºF and PPM

Move to previous/next configuration menu

Toggle between 12 hour AM/PM (default) and 24 hour time format options

Toggle between ºF and PPM (default) and ºC and g/L (Metric) options

Reset Config. to

Default Press +

Are you sure?

+ to proceed

Config. reset

Confirmed

Initiate reset of all configuration parameters

Reset all configuration parameters

Move to previous/next configuration menu (config. not reset)

Move to previous/next menu (config. not reset)

Move to previous/next configuration menu

Use this function to erase all previous system configuration and reset all configuration parameters

back to the factory default values. This function is NOT reversible--be careful.

Quick “How To” Guide

Operate the Spa—Manually

1. Press the “Pool/Spa” button to go to “spa-only” operation (right LED illuminated). In some cases,

this may take more than one press of the button.

2. If the filter pump is not already on, press the “FILTER” button to turn it on.

3. If the spa is below the desired temperature, the heater will turn on automatically when the filter pump

is on and the valves are in the spa-only position. If you have not already set the desired temperature

for the spa, see “Set Heater Temperature” below.

4. If the spa has a separate jet pump and or blower, determine if the jet pump/blower is controlled by

Aux1 or Aux2 (it should be marked on the label inside the door). Then press the appropriate button

to turn on the jets/blower.

Operate the Spa—Automatically

1. Press the “MENU” button repeatedly until “Timers Menu” is displayed.

2. Press the “>” button repeatedly until the “Spa—all” or “Spa—wkend” is displayed.

3. Use the “+” and “-“ buttons to set the desired start time, then press “>” to switch to the off time. Use

the “+” and “-“ buttons to adjust the off time. If you are setting the “weekend” timeclock, press “>” to

go to the “weekday” settings.

denotes conditional items

12 hour or 24 hour time format

ºF or ºC

reset to default

default menu

day and time

water temperature

air temperature

chlorinator setting

salt level

reason pump is running (not scheduled)

reason hi-speed is running (not scheduled)

countdown time remaining

heater control status

system manual off

check system error

filter speed

settings menu

spa heater temperature

pool heater temperature

spa solar temperature

pool solar temperature

superchlorinate

spa chlorinator setting

pool chlorinator setting

spa high/low speed

pool high/low speed

day and time

backlit display light

beeper

teach wireless remote

wireless channel

timers menu

pool filter pump

spa

lights

aux1
aux2

valve3

superchlorinate

diagnostic menu

salt level

water sensor

air sensor

solar sensor

main software revision

display software revision

filter bridge/vsc software revision

RF base software revision

configuration menu

chlorinator

pool/spa

filter

heater

solar

lights

aux1
aux2

valve3

remote menus

7-day or weekend/weekday timeclock

Содержание ONCOM
































Результаты поиска

Содержание ONCOM

Отзывы:

Бренды по названию

Популярные бренды

Hayward ONCOM, Руководство по эксплуатации

Результаты поиска

Содержание ONCOM

Отзывы:

Бренды по названию

Популярные бренды