Hayward CAT 4000, Руководство пользователя

Страница: 22 / 36

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
21
Display System Information:
The Display System Info function is used to view firmware revision number and the system date
and time as acquired from the wireless communications link. From the Configuration Setup Menu:
Press DOWN to find the Display System Info menu item.
Press ENTER to select Display System Info.
Press ENTER at the prompt to confirm the selection.
The System Information will be displayed:
After 10 seconds, the controller will revert to the Configuration Setup Menu.
Update FW via BL:
This feature is used to update firmware on the controller. Please contact Hayward Commercial at
301-838-4001 if you have firmware issues with your controller. From the Configuration Setup
Menu:
Press DOWN to find the Update FW via BL Menu item.
Restore Factory Defaults:
The Restore Factory Defaults function erases all user-modified settings from memory and restores
all factory default settings and values. From the Configuration Setup Menu:
Press DOWN to find the Restore Factory Def. menu item.
Press ENTER to select Restore Factory Def.
Press ENTER again at the following prompt:
The display will go blank, and all default settings will be restored.
After 10 seconds, the controller will revert to the Normal Operating Mode.
Caution: all user modified settings including acid/base feed mode, alarms, setpoints, etc. must
now be configured as described earlier in this manual.
Configuration Setup
Update FW via BL
Restore Factory Def.
ENTER to Restore...
firmware version 1.8
07-12-05 13:22 (UTC)