Hayward CAT 4000, Руководство пользователя

Страница: 17 / 36

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
16
ORP Mixing Time Off:
This feature prevents the controller from receiving inaccurate readings due to chemicals pass-
ing directly through the flow cell and over the sensors before being injected into the return line.
Typically this would occur when the sanitizer is fed on the “suction side” of the primary circulation/
filter pump. To program the amount of time you would like the controller to stop feed and ignore
readings after its feed cycle please follow the steps below. From the Configuration Set Up Menu:
Press DOWN to find the ORP Mixing Time Off Menu item.
Press ENTER to select ORP Mixing Time Off.
The current ORP Mixing Time Off setting will be displayed:
Press UP or Down to scroll to desired setting.
Press ENTER to save your selection.
ORP Low Alarm:
The ORP Low Alarm inhibits ORP feed, sounds audible and visual alarms, and sends a message to
the POOLCOMM website during a low ORP condition. From the Configuration Setup Menu:
Press DOWN to find the ORP Low Alarm menu item.
Press ENTER to select ORP Low Alarm.
The current ORP Low Alarm Setting will be displayed:
Press UP or DOWN to scroll to the desired setting.
Press ENTER to save your selection.
ORP High Alarm:
The ORP High Alarm inhibits ORP feed, sounds audible and visual alarms, and sends a message to
the POOLCOMM website during a high ORP condition. From the Configuration Setup Menu:
Press DOWN to find the ORP High Alarm menu item.
Press ENTER to select ORP High Alarm.
The current ORP High Alarm Setting will be displayed:
Press UP or DOWN to scroll to the desired setting.
Press ENTER to save your selection.
ORP High Alarm
900 mV
ORP Low Alarm
400 mV
Mixing Time Off Time
30 seconds